一区二区三区中文字幕

<u id="k6myy"><center id="k6myy"></center></u>
<button id="k6myy"></button>
  • <sup id="k6myy"></sup>
  • Concrete Truck-Mounted Boom Pump

    PRODUCTS SERVICE & SPARE PARTS PROJECTS ABOUT TRUEMAX CONTACT US
    PRODUCTS
    Home >  PRODUCTS >  Sand Making Machine >  New Sand Making Machines|Rock crusher-TRUEMAX

    New Sand Making Machines|Rock crusher-TRUEMAX

    PRODUCT INTRODUCTION

    The 5X series of new sand making machines (centrifugal impact crusher) are widely used in various metal and non-metal ores, cement, refractory materials, abrasives, glass raw materials, building aggregates, machine-made sand, metallurgy and other industries. It is suitable for medium and fine crushing of high-hardness materials such as iron ore, non-ferrous metal ore, corundum, bauxite, quartz sand, bauxite, perlite, and basalt


    WORKING PRINCIPLE

    XRVSl5X vertical shaft impact breaking (also known as sand making machine) has two feeding modes, full center feeding: the material falls into the feed hopper, enters the high-speed rotating rotor through the center feed hole, and is fully accelerated and thrown through the launch port Out, first collide with a part of the free-falling material after rebound, and then hit the vortex material lining (or counter-attack block) in the surrounding vortex cavity together, first be rebounded to the top of the crushing cavity, and then deflect downward , And the material ejected from the impeller flow channel collide to form a continuous material curtain, and finally discharged through the lower discharge port. The center feed is accompanied by a ring-shaped waterfall: the material falls into the feed hopper, and then falls through the ring hole, and is divided into two by the bulk material tray. One enters the impeller rotating at a high speed through the distribution tray, and the other falls from the periphery of the distribution tray. The material that enters the impeller is quickly accelerated in the impeller and is thrown out at high speed. It first falls freely with the other part of the bulk tray. The material is crushed by impact, and then impacts on the vortex-shaped material lining (or counterattack block) in the surrounding vortex cavity, and is first rebounded to the top of the crushing cavity, and then deflected downward to move with the material emitted from the impeller flow path The impact forms a continuous curtain of material, which is finally discharged through the lower discharge opening. 


    PRODUCTION ADVANTAGES

    After the mechanical analysis and verification, the impeller and wearing parts of the XRVSISX impact crusher have been opti嚇zed in structure Compared with traditional impact breaking, the material throughput and crushing ratio have been increased by 30%-60%; the wear cost of wearing parts has been reduced by more than 40% 


    Considering the maintenance and replacement of parts 1n the production process of the sand making machine, we introduced a sem1-automat1c hydraulic system. The operator only needs to press the button to open the top cover for maintenance and other operations, thereby reducing labor 
    costs and 1mprov1ng work efficiency 

    According to the actual production, we found that the wearing parts such as peripheral guard plates and impact blocks all have the problem of local 
    wear and tear. Therefore, Q1ru1 Group designed the series of wearing parts to greatly extend the service life of the wearing parts and reduce it. Cost of wearing parts 

    Considering the customer's two production requirements for sand making and shaping, it is necessary to switch between the two modes of center feeding and waterfall feeding of the sand making machine. Q如Group has made a new and improved design for the bulk tray, the operator can Easily complete mode conversion, reduce downtime adjustment time 


    Product configuration

    型號 Model

    XRVSI5X7615

    XRVSI5X8522

    XRVSI5X9532

    XRVSI5X1145

     

    產量 (t/h)

    Output (t/h)

    瀑落與中心進料 
     Waterfall and center feed

    150~280

    240~380

    350~540

    500~640

     

    全中心進料

    Full center feed

    70~140

    120~200

    180~280

    250~360

     

     

    最大入料尺寸(mm)

     Max. feeding size (mm)

    軟料 Soft material

    <35

    <40

    <45

    <50

     

    硬料 Hard material

    <30

    <35

    <40

    <45

     

    轉速(r/min)Speed (r/min)

    1700~1900

    1500~1700

    1300~1510

    1100~1310

     

    雙電機功率(kW)Double motor power (kW)

    150

    220

    320

    440

     

    最大外形尺寸 長x寬x高 (mm)

    Max. dimensions L x W x H (mm)

    4100×2300×2300

    4140×2500×2700

    4560×2600×2900

    5100×2790×3320

     

    電源 Power supply

    380V,50Hz

    雙油泵電機功率 (kW)

    Double oil pump motor power (kW)

    2x0.31

     

    型號 Model

    5X7615

    5X8522

    5X9532

    5X1145

     

    稀油潤滑站

    Thin oil lubrication station

       安全保護

    safety protection

    雙油泵互補保證供油;無油流、無油壓自動停機;

    Double oil pumps complement each other to ensure oil supply; automatic shutdown without oil flow and oil pressure;

     

    風(水)冷降溫;冬季電機加熱啟動。

    Wind (water) cooling and cooling; motor heating start in winter.

     

    油箱加熱器功率(kW)

    Fuel tank heater power (kW)

    2


    Online submission of demand feedback

    You can fill in the form below, submit your contact information and product requirements to us, we will contact you as soon as possible, thank you! In order to get in touch with you in time, please be sure to fill in your contact information and demand information.

    CONTACT US

    Telephone and mail feedback within 24 hours

    Hangzhou Truemax Machinery & Equipment Co., Ltd. provide you with 24- hour email technical support, when you encounter problems, Truemax have a professional technical team with professional technical support.

    Email

    sales@truemax.cn

    Tel

    0086-571-85803511

    Address

    Headquarters address:
    11th Floor, Yinfeng Building, 1505 Binsheng Road, Hangzhou, China

    Factory address:
    118 Haifeng Road, Jianshan New District, Haining City, Zhejiang Province,China

    PRODUCT INTRODUCTION The 5X series of new sand making machines (centrifugal impact crusher) are widely used in various metal and non-metal ores, cement, refractory materials, abrasives, glass raw materials, building aggregates, machine-made sand, metallurgy and other industries. It is s

    Submit your information, you will be able to view the product exclusive highlights !

    Essential information ( Required )

    TEL:  
    Name:  
    EMAIL:  
    Country:  

    一区二区三区中文字幕
    <u id="k6myy"><center id="k6myy"></center></u>
    <button id="k6myy"></button>
  • <sup id="k6myy"></sup>